1. Dimensional tolerance
| Dimensional Range (DIM.) |
General Tolerance (TOL.) |
Special Tolerance (TOL)Special Tolerance (TOL) |
| 1~12 mm |
±0.2 mm |
± 0.13 mm |
| 13~25 mm |
±0.25mm |
± 0.15 mm |
| 26~50 mmm |
±0.35 mm |
± 0.2 mm |
| 51~75 mm |
±0.5 mm |
± 0.25 mm |
| 76~100 mm |
±0.7 mm |
± 0.3 mm |
| 101 mm 이상 |
±0.75% |
± 0.35 % |
2. Angle tolerance
| Shape |
General tolerance |
Special tolerance |
|
|
± 1° |
± 1/2° |
|
|
± 2° |
± 1° |
|
|
± 2° |
± 1° |
3. Flatness and Straightness Equal to the above dimensional tolerances
4. Concentricity management
- Typical concentricity management within 0.13 mm (0.05 ") per 25.4 mm (1")
- The amount of shaking is reflected in the deviation of the straightness if the length exceeds twice the inner and outer diameters, respectively.
5. Roundness
| Diameter |
Sum of measurements |
| 0 ~ 12 mm |
0.25 mm |
| 13 ~ 25 mm |
0.35 mm |
| 26 ~ 50 mm |
0.50 mm |
| Additional tolerances apply when more than 50 mm |
6. Weight and size limits
| Weight |
Size |
| Max. 100kg |
1000 x 1000 x 1000 mm |
7. Minimum corner radius
| Metal |
Nonferrous metal |
| 0.3 mm |
0.18 mm |
8. 표면조도
| Metal |
Nonferrous metal |
| 90 ~ 125 RMS |
63 ~ 100 RMS |
9. Recommended shape reference
1) Depth of hole recommended dimensions
| Dia. Or Sq. |
Clogged hole depth |
Through hole depth |
| 2~4 mm |
h < dx0.6 |
H < Dx1.0 |
| 5~6 mm |
h < dx1.0 |
H < Dx2.0 |
| 7~10 mm |
h < dx1.6 |
H < Dx3.0 |
| 11 mm 이상 |
h < dx2.0 |
H < Dx4.0 |
| Shape |
|
|
2) Recommended dimensions of SLOT
| 만약 w > 3.0 mm (.120") 이고 |
| ℓ>2w일때 |
ℓ<2w일때 |
| h < 2w |
h < 3w |
| ※ When h is less than 1.0 mm, the minimum value of w is recommended to be more than 1.3 mm (0.051 ") |
3) Avoid sharply reducing thickness
4) Designed for easy separation
5) Avoid sharp edges
6) Avoid angled corners
7) Embossing is recommended rather than engraving.
8) Designed so that the intersecting parts do not gather together
조회 : 386
